Hn562vn Road Milling Asphalt Bit Round Shank Chisel Bitfoundation Auger Bits Road Milling Concrete Bit Conical Cutting Tools with Bullet Teeth for Foundation

Key Words: Bullet, Rotary Digging Pick

Part Name: Rotary Digging Picks
Part No.: HN5622VN            
Brand: Honor
Origin: China
Weight: 1.22KG
Size: 134mm*55mm
MOQ: 10

Compressive Strength: <40Mpa
Applied Geology Type: Medium-strength shale, marl, tuff, micro-fractured limestone and sandstone, the rock hardness is above F5.

Performance Standard: 
1. Material properties(GB/T3077-1999)
2. Standard of non-metallic inclusions ≤ grade 2 (GB/T10561-2005)
3. The band tissue meets the requirements of grade 0 (GB/T13299-1991)
4. Hardness properties (MT/246-2006)

Maintenance: 
1. The snap ring cannot be reused, a new snap ring must be used when updating a new pick.
2. Immediately replace worn, dulled picks, and worn pick adapters to reduce the load on equipment and other accessories.
3. The pick must be able to rotate flexibly in the pick seat. If the pick is stuck, tap it lightly with a brass or rubber mallet. When installing new picks, the hole of the tool holder should be cleaned to ensure that the pick head rotates freely.
4. Use the correct tool to install the pick, such as a brass hammer or a rubber hammer. Never hit the pick head with a hammer or metal object.
5. Make sure the pick seat is welded at the correct angle and that the pick is installed correctly and in place in the adapter.
6. Keep the tip extension of the pick appropriate to avoid affecting the cutting width and causing excessive load on the equipment and other accessories.
7. In the case of missing picks, suspend the use of the pile drilling tool

 

 

Honor Picks
The alloy is made of domestic brand low cobalt tungsten carbide large particle, primary alloy material, which has good impact resistance and thermal fatigue resistance. The pick adopts a special heat treatment method, which fully guarantees the high hardness and wear resistance of the pick head. The handle has good toughness and impact resistance. HN5622VN, HN5624VE, HN5626VE-P, HN5630VE etc. adopt vacuum welding process.

Key Words: Bullet, Rotary Digging Pick

Part Name: Rotary Digging Picks
Part No.: HN5624VE            
Brand: Honor
Origin: China
Weight: 1.37KG
Size: 134mm*59mm
MOQ: 10

Compressive Strength: <60Mpa
Applied Geology Type: Hard marl, calcareous conglomerate, mica and sandy shale, marl limestone and sandstone, the rock hardness is below F10.

Performance Standard: 
1. Material properties(GB/T3077-1999)
2. Standard of non-metallic inclusions ≤ grade 2 (GB/T10561-2005)
3. The band tissue meets the requirements of grade 0 (GB/T13299-1991)
4. Hardness properties (MT/246-2006)

Maintenance: 
1. The snap ring cannot be reused, a new snap ring must be used when updating a new pick.
2. Immediately replace worn, dulled picks, and worn pick adapters to reduce the load on equipment and other accessories.
3. The pick must be able to rotate flexibly in the pick seat. If the pick is stuck, tap it lightly with a brass or rubber mallet. When installing new picks, the hole of the tool holder should be cleaned to ensure that the pick head rotates freely.
4. Use the correct tool to install the pick, such as a brass hammer or a rubber hammer. Never hit the pick head with a hammer or metal object.
5. Make sure the pick seat is welded at the correct angle and that the pick is installed correctly and in place in the adapter.
6. Keep the tip extension of the pick appropriate to avoid affecting the cutting width and causing excessive load on the equipment and other accessories.
7. In the case of missing picks, suspend the use of the pile drilling tool.
 

Price: When ordering in large quantities, the price is guaranteed to be the most competitive on the entire network.
Quality: Genuine parts, fake one loses ten.
Delivery time: In order to meet customer needs, our company reserves different models of genuine Cummins spare parts inventory. No matter when and where customers have demand for Cummins engine parts, we can respond quickly, except for some infrequently used parts.

Q1: How much is the MOQ?
A: MOQ varies for different products.

Q2: Do you provide sample?
A: Samples can be provided and the cost of ordering samples shall be borne by yourself.

Q3: What is the shipping way?
A: Shipping way is determined according to customer needs, order quantity and product category.
 
Q4: How long is the delivery time?
A: Picking spot. Cummins products according to supplier, most of the spot or production cycle is about 7 days. The shipping cycle is determined by the shipping method.

Q5: What does the packaging look like?
A: Cummins product packaging is determined by mutual negotiation. The packaging of the picks is subject to our company.

Q6: How to pay?
A: Multiple ways. Mainly T/T.

Q7: What is the after-sales guarantee?
A: Abnormal damage can be claimed. Our company continues to provide technical advice.


Cummins Engine Parts
Chongqing Honor Company can provide you with pure and high-quality Cummins engine parts of various models. Parts are divided into overhaul parts, common parts, kits, etc. We have a professional and experienced technical service and sales team. According to the engine model you provide, part name or part number, we will be able to respond quickly to your needs.
Cummins common parts
Common parts refer to the parts that may need to be replaced due to damage during routine maintenance or during engine work.
HN5624VE Conical Bullet Pick Road Milling Picks Bullet Teeth Road Milling Coad Mining Teeth Drill Auger Teeth Wirtgen Picks Rock Auger Teeth Milling Machine Par

HN562VN Road milling asphalt bit Round Shank Chisel BitFoundation auger bits Road milling concrete bit Conical Cutting Tools with Bullet Teeth for Foundation